Enter a search term

CNC Lathes

This page will update every 3 seconds. Bidding will be extended on individual lots if bids are placed within 10 minutes of the items end time.

  1. Mazak Quick Slant 30N, 4 Axis CNC Lathe
    Mazatrol CAM T-4 Controller, 4 axis CNC Lathe,
    Twin Turret and tailstock
    Parts catcher
    box of soft jaws.
    YOM: 1986

    Location: Ireland

    Opening bid: £1500
    Increment: £100
    Bids: 0
    Ends in: 2013-05-23 15:00:00 (2d 0h)
    £
    £
  2. Hitachi Hi-Cell CA23 5 Axis CNC Lathe
    with Driven Tooling and Milling Facility

    sn.23135
    YOM: Sept 1990

    Y Axis
    C Axis

    Nice Selection of Driven and Standard Tooling to be sold with Machine

    Full Spec to follow shortly.

    Location: Guilford
    Opening bid: £2000
    Increment: £100
    Bids: 0
    Ends in: 2013-05-30 15:00:00 (9d 0h)
    £
    £
  3. Hardinge Conquest T42 2 Axis CNC Turning Centre (1995)

    152mm max. Machining diameter,
    353mm max turned length,
    5000rpm spindle,
    16C Collet nose,
    42mm bar capacity,
    12 station turret,
    7.5kW spindle motor,
    FANUC 18T control,
    Parts catcher

    Location: Leicester, Can be Loaded Free to Flatbed Truck

    Opening bid: £2500
    Increment: £100
    Bids: 0
    Ends in: 2013-06-13 15:00:00 (23d 0h)
    £
    £
  4. Haas HL-2 CNC Lathe

    Specifications:
    Capacity: Swing 20"
    Swing Over Cross Slide 8.0
    Distance Between Centers 24"
    Spindle: Spindle Speeds 3750 RPM
    Spindle Bore 3"
    Spindle Nose A2-6
    Bar Capacity 2.0"
    Main Motor 15 HP
    Turret: Number of Positions 10
    X-Axis Travel 8.45"
    Z-Axis Travel 20"
    Speeds: Rapid Traverse ...

    Opening bid: £4500
    Increment: £100
    Bids: 0
    Ends in: 2013-06-13 15:00:00 (23d 0h)
    £
    £
  5. Hyundai HIT 15S with siemens Hitrol 840C controller

    Swing Over Bed 440mm.
    52mm spindle bore
    500mm between centres
    12 station turret,
    collet chuck,
    tailstock
    parts catcher
    Swarf conveyor & Bin
    Hydrafeed ML1 short magazine barfeed
    manufactured 1998

    Location: Leicester, Load for Free to Flatbed Truck

    Opening bid: £2500
    Increment: £100
    Bids: 0
    Ends in: 2013-06-13 15:00:00 (23d 0h)
    £
    £
  6. STAR RNC-16B

    Fanuc OTT control Alpha motors/drives,
    Built 6/1990
    delivered/installed late 1991.
    16mm capacity with LNS Hydrabar bar feed init
    All manuals and equipment (colletts inc.).

    Operator says its very accurate and reliable. Little used and only very small work 0.020 – 0.250” components.

    Location: ...

    Opening bid: £3900
    Increment: £100
    Bids: 0
    Ends in: 2013-06-13 15:00:00 (23d 0h)
    £
    £
  7. Churchill Omega 80 CNC Lathe with C axis and driven tools (1995)

    Swing over bed 710mm
    Max turning diameter 300mm
    315mm 3 jaw power chuck
    12 station VDI turret
    A2-8” spindle nose
    85mm hole thru spindle
    75mm bar cap.
    22kw main motor
    4,000 rpm spindle
    2 off driven tools, 1 radial, 1 axial, selection of ...

    Opening bid: £4500
    Increment: £100
    Bids: 0
    Ends in: 2013-06-13 15:00:00 (23d 0h)
    £
    £
  8. Harrison VS450 CNC Lathe

    Approximately 60'' Between Center,
    Gap Bed,
    12 Station Turret
    Tail stock
    Fanuc OT control.

    Location: Birmingham
    To be confirmed: Steady included

    Opening bid: £1000
    Increment: £100
    Bids: 0
    Ends in: 2013-06-13 15:00:00 (23d 0h)
    £
    £
  9. Bridgeport EZ Path CNC Lathe(1995)

    Swing 419mm,
    1016mm Between Centres,
    X travel 203mm,
    Z Travel 1016mm,
    Spindle Bore 50mm Dia.,
    Spindle Speeds to 3000 RPM.
    3 Jaw Chuck,
    Quick Change Toolpost & Holders.
    EZ Path CNC Control,
    Coolant
    Manuals 

    Location: Leicester, Can be loaded Free to flatbed Truck

    Re-auctioned ...

    Opening bid: £1200
    Increment: £100
    Bids: 0
    Ends in: 2013-06-13 15:00:00 (23d 0h)
    £
    £