Cincinnati Sabre 1000 VMC

Lot 3 - Cincinnati Sabre 1000 VMC

Description:

Cincinnati Sabre 1000 VMC

S/n: 91202798 Model: Acramatic 850 SX
Heidenhain TNC 415B control
Axis Travel Ranges:
Longitudinal (table X Axis): 1020mm
Cross (Saddle Y Axis): 510 mm
Vertical (Spindle Carrier, Z Axis): 560mm
Range, Spindle gauge line to work surface:
Max: 687mm Min: 127mm
Throat Depth: 150mm
Spindle (snout): Dia: 150mm, Length: 100mm

Table, X- Axis
Work surface dimensions: 510 x 1120mm
Load Capacity: 700kg

Spindle Carrier, Z Axis
Drive Motor: 9.0kW (12hp) AC Cont. Rated
Spindle Speed Range (standard) 60 - 8000rpm
No of speeds: Programmable in 1 rpm increments
Tool Holder: BT 40

Linear Axis Feedrates and Thrust
Feedrates X and Y axes (mm/min) 3-20,000
Feedrates Z Axis (mm/min) 3-18,000
Rapid traverse rate X and Y axes (mm/min) 20,000
Rapid traverse rate Z axes (mm/min) 18,000
Z Axis thrust at spindle (duty rated) 7.5kN
X Axis thrust (duty rated) 3.1kN
Y Axis thrust (duty rated) 2.6kN

21 Station tool changer
Random tool selection
Max tool and holder weight: 6.8kg
Max tool ring load: 68kg (evenly spaced)
Max tool length: 304mm
Max tool dia, all stations full: 80mm
Max tool dia, adjacent stations empty: 160mm
Automatic tool change time: 7.5 sec approx (metal to metal)
Through coolant Nozzles

Machine net weight approx: 4545kg
Overall machine height from floor: 2.75m
Overall floor space (approx) (without swarf conveyor): 3030 x 3800mm
Overall floor space (approx) (with swarf conveyor): 3030 x 5160mm

Tooling as per Photos
Machine Vice included
No swarf bin included
Extended Side Panel with be taken off and replaced with original side panel as in Photo.

Location: GeGa Lotz Ltd, Swadlincote

Export Information

Please note: If you are successful in purchasing an item and wish to export it from the UK, a charge of £75.00 will be automatically added to your invoice to cover preparation of the goods and completion of the required UK export customs declarations. This process has been a mandatory UK export requirement since 1 January 2021.

All invoices are issued on an Incoterms FCA basis.

Exports outside the EU may require an export licence. Where applicable, a further charge of £250.00 will be automatically added to your invoice. Please also note that, while an export licence is being processed, the purchaser is responsible for placing into storage until the licence is issued.

* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.

Recommended Transport