Lot 3 - Hurco VM10i CNC Vertical Machining Centre with HSE compliant extraction (2017)
Description:
Comes with a selection of tooling, has through coolant spindle.
X,Y,Z Axis travel - 660 x 406 x 508mm, Table working surface - 762 x 406mm, Table T Slots - 3 off x 18mm/100mm centres, Maximum table load - 681kg, Spindle nose to table - 101.6mm/610mm, Coolant capacity - 62litres, Spindle taper - CAT 40, Spindle speed - 10,000 RPM, Spindle motor horsepower (1min) - 15HP (11kW)(1 min rating), Spindle motor torque - 73.6 Nm at 1450 RPM, Rapid traverse rate X,Y,Z - 24M/minute, Cutting feed rate - 19M/minute, Positioning accuracy - 0.010mm, Repeatability - 0.005mm, Number of stations - 20/CAT 40, Tool to Tool ATC Time - 2.5 seconds, Tool changer type - Electronic, Maximum tool diameter - 89mm, Maximum tool length - 250mm.
* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Bid information
Time remaining
29 May 2025 15:00:00 BST
Opening bid: £12000
Bids: 0
Serial Number: S10 - 1611567FKAAH
Location: Towcester
Transport information
- Width: 2994mm
- Depth: 2487mm
- Height: 2470mm
- Weight: 3018kg
- Other Transport Details: No loading facilities on site