Lot 1 - Matsuura V Max-800 5AX 5 Axis VMC (2003)
Description:
Matsuura V Max-800 5AX 5 Axis VMC (2003)
Additional Information: LOW hours.
Additional Equipment: Full Swarf Management System
Control: Siemens 840 Di
A Axis: 25 rpm / 220°
C axis: 30 rpm / 360°
Maximum Machining Diameter: 500mm Ø
Spindle Speed: 15,000 rpm
Table Size: 400mm Ø
Floor space incl maintenance area:L 3920mm W x 5500mm D x 3440mm H
Description:
Swarf conveyor, Tool setter, Coolant, Interlocked guards, C axis, A Axis, 5 Axis, Wash Gun in load area.
Strokes:
X axis stroke: 635mm
Y axis stroke: 600mm
Z axis stroke: 500mm
Spindle:
Spindle speed: 50~15000 min -1
Additional Equipment: Full Swarf Management System
Control: Siemens 840 Di
A Axis: 25 rpm / 220°
C axis: 30 rpm / 360°
Maximum Machining Diameter: 500mm Ø
Spindle Speed: 15,000 rpm
Table Size: 400mm Ø
Floor space incl maintenance area:L 3920mm W x 5500mm D x 3440mm H
Description:
Swarf conveyor, Tool setter, Coolant, Interlocked guards, C axis, A Axis, 5 Axis, Wash Gun in load area.
Strokes:
X axis stroke: 635mm
Y axis stroke: 600mm
Z axis stroke: 500mm
Spindle:
Spindle speed: 50~15000 min -1
Spindle Taper: 7/24 taper #40 (BT double contact mechanism)
Spindle bearing ID: 80mm
Max.spindle torque: 150/1400 min -1 Nm
Spindle air blow: Standard
Spindle orientation: Standard (electric)
Feed Rates:
Rapid traverse rate (X/Y/Z): 60000 (2362.2”)
Cutting feed rate (X/Y/Z): 1~60000
Jog feed rate: 0~4000
Automatic tool changer:
Type of tool shank: JIS B tool shank 40T
Type of retention knob: JIS B 6339 pull stud 40P
Tool storage: 30 Pcs
Max. tool diameter: 90mm
Max. tool length: 350mm
Max. tool weight: 10kg
Tool change time (tool to tool): 0.9 sec (less than 5kg), 2.8 sec (more than 5kg)
Tool change time (chip to chip): 2.8 sec
Tool pot pitch: 95mm
Mass of machine + NC+ATC magazine: 12000kg
Tank capacity:
Hydraulic tank capacity: 7Lt (tank capacity 9)
Coolant tank capacity: 400Lt
Spindle bearing ID: 80mm
Max.spindle torque: 150/1400 min -1 Nm
Spindle air blow: Standard
Spindle orientation: Standard (electric)
Feed Rates:
Rapid traverse rate (X/Y/Z): 60000 (2362.2”)
Cutting feed rate (X/Y/Z): 1~60000
Jog feed rate: 0~4000
Automatic tool changer:
Type of tool shank: JIS B tool shank 40T
Type of retention knob: JIS B 6339 pull stud 40P
Tool storage: 30 Pcs
Max. tool diameter: 90mm
Max. tool length: 350mm
Max. tool weight: 10kg
Tool change time (tool to tool): 0.9 sec (less than 5kg), 2.8 sec (more than 5kg)
Tool change time (chip to chip): 2.8 sec
Tool pot pitch: 95mm
Mass of machine + NC+ATC magazine: 12000kg
Tank capacity:
Hydraulic tank capacity: 7Lt (tank capacity 9)
Coolant tank capacity: 400Lt
Location: Bletchley, Milton Keynes.
Will be moved to Coventry when new Matsuura arrives on 11th August.
* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Bid information
Time remaining
HRSMINSEC
000000
11 Sep 2014 15:00:00 BST