Lot 1 - MORI SEIKI NL2500SY/700 5 Axis CNC Lathe (2006)
Description:
Tool Holder Package are as in photos.
Swing Over Bed mm (in) 923.8 (36.37) < interference with front cover: 579.8 (22.83)
Swing Over Cross Slide mm (in) 755 (29.72)
Maximum Distance Between Spindle Nose Surfaces mm (in) 961 (37.83)
Max. Turning Diameter mm (in) 356 (14.02)
Standard Turning Diameter mm (in) 275 (10.83)
Max. Turning Length mm (in) 705 (27.76)
Bar Work Capacity mm (in) 80 (3.15)
Travel
X-Axis Travel mm (in) 260 (10.24)
Y-Axis Travel mm (in) -50, +50 (-1.67, +1.67)
Z-Axis Travel mm (in) 795 (31.30)
Spindle 2 B-Axis Travel mm (in) 734 (28.90)
Spindle 1
Spindle Speed Range min -1 4000
Number of Spindle Speed Ranges. Step 2
Spindle Nose Type JIS A-2
Through-Spindle Hole Diameter mm (in) 91 (3.58)
Min. Spindle Indexing Angle 0.001
Spindle Bearing Inner Diameter mm (in) 140 (5.51)
Chuck 10” Solid Chuck & Hollow Chuck
Spindle 2
Spindle Speed Range min -1 6000
Number of Spindle Speed Ranges Step 1
Spindle Nose Type JIS-A5
Through-Spindle Hole Diameter mm (in) 43 (1.69) [73(2.87)]
Min Spindle Indexing Angle 0.001
Spindle Bearing Inner Diameter mm (in) 85 (3.35)
Chuck 6” Solid Chuck & Hollow Chuck
Turret
Turret Type 12 Station (10 station)
Turret Tool Mounting Capacity (Tools) 12 (10)
Height of Angled Tool Shank Section mm (in) 25 (0.98)
Diameter of Boring Bar Shank Section mm (in) 50 (1.97) < Spindle: 32 (1.26) > [32 (1.26)]
Turret Rotary Tool Spindle
Rotary Tool Spindle Rate min -1 6000
Rotary Tool Machining Capacity mm (in) Drill 26 (1.02) Tap: Max. M20
Feed Rates
Rapid Traverse Rate mm/min (ipm) X,Y,B: 30000 (1181.10) Y: 10000 (393.70)
Jog Feed rate mm/min (ipm) X,Y,Z,B: 0~5000 (0 to 196.85)
Motors
Spindle 1 Drive motor
(30 min./Continuous Rating) kW (HP) 18.5/15 (26/22) [24.79/20.10 (34.84/29.48)]
Spindle 2 Drive motor (30 min./Continuous Rating) 11/7.5 (14.74/10.05)
Rotary Tool Spindle Drive Motor (5 min./ Continuous Rating) 5.5/3.7 (7.37/4.96)
Feed Motors kW (HP)
X, Z: 3.5 (4.69)
Y, B: 2.0 (2.68)
Hydraulic Pump Motor kW (HP) 1.5 (2.01)
Lubricant Pump Motor kW (HP) 0.02 (0.03)
Coolant Pump Motor kW (HP) 0.52 (0.70) <0.325 (0.44)>
Oil Cooler Pump Motor kW (HP) Compressor: 0.5(0.67) Circulating Pump: 0.4(0.54)
Required Power/ Air Sources
Electrical Power Supply (continuous rating) kVA 39.20 [47.0]
Compressed Air Supply
MPa (psi) L/min (gpm) 0.5 MPa (72.50), 100 (26.4)
Tank Capacity
Hydraulic Oil Tank Capacity L (gal.) (2.64)
Lubricant Tank Capacity L (gal) 4 (1.06)Coolant Tank Capacity L (gal) 246 (64.94)
Oil Temperature Controller Capacity L (gal) 10 (2.64)
Floor Space (Chip Conveyor Included) mm (in) 3100 (122.05)
< Chip Conveyor: +684.3 (+26.94)> x 2000 (78.74)
Machine Mass kg (lb.) 6200 (13640)
Export Information
Please note: If you are successful in purchasing an item and wish to export it from the UK, a charge of £75.00 will be automatically added to your invoice to cover preparation of the goods and completion of the required UK export customs declarations. This process has been a mandatory UK export requirement since 1 January 2021.
All invoices are issued on an Incoterms FCA basis.
Exports outside the EU may require an export licence. Where applicable, a further charge of £250.00 will be automatically added to your invoice. Please also note that, while an export licence is being processed, the purchaser is responsible for placing into storage until the licence is issued.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Bid information
Time remaining
10 Apr 2014 16:30:00 BST