Description:
* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Specifications:
The specifications given are to the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.
Max Turning Diameter - 32mm
Max Headstock Stroke - Standard - 310mm, With Gripping Unit - 295mm
Max Drilling Capacity - Stationary Tool - 14mm, Power-Driven Tool - 8mm
Max Tapping Capacity - Stationary Tool - M12XP1.75, Power-Driven Tool - M6XP1.0
Max Milling Capacity - 10mm
Max Chucking Diameter - ER11:7, ER16:10, ER20:13, T7:7
Max Die Cutting Capacity - M10XP1.5
Max Slotting Capacity - 2mm(w) x 3.5mm(d) (Max woodruff slotter dia:24)
Main Spindle Speed - 7000min
Main spindle Min. Indexing Angle - 0.01 (C-Axis Control)
Main Spindle Motor - 5.5kw (Continuous)/7.5kw (30 mins)
Number of Tools - 6 Tools + 4 Power Driven Tools
Tool Shank - 16x100 ~135mm (5/8x4 ~ 5-5/16in)
Power Driven Attachment - Speed - 5000min, Motor - 0.75kw (Inverter Mode)
Main spindle Centre Height - 1070mm (Except for Leveling Pad)
4-Spindle Endworking Attachment - Number of Tools - 4, Max Drilling Capacity - 14mm, Max Tapping Capacity - M12XP1.75, Max die Cutting Capacity - M10XP1.5
Max Chucking Diameter - ER11:7, ER16:10, ER20:13, T7:7
Max die Diameter - 30
Coolant Tank Capacity - 120
Coolant Motor - 0.25kw
Coolant Used - Oil-Based Coolant, Water-Based Coolant
Hydraulic Tank Capacity - 30
Hydraulic Pump Motor - 1.5kw
Power Consumption - 7.0 KVA
BACKWORKING SPECIFICATIONS
Max Turning Diameter - 32mm
Max Length for Front Ejection - 125mm
Max Parts Projection Length - 45mm Distance from Collet End
4-Spindle unit for backworking - Number of Tools - 4 Tools, Max Drilling Capacity - 13mm Max Chucking dia ER20:13, Max Tapping Capacity - M10XP1.5 Max Chucking dia ER16:10
Sub Spindle Motor - 2.2kw/3.7kw (15 mins)
Sub Spindle Min. Indexing Angle - 1 (360 Divisions): OP/15 (24 Divisions)OP
Sub Spindle Speed - 7000 min
Time remaining
20 Nov 2019 16:00:00 GMT