Lot 26 - TOS TRENS SN 710S 2m Gap Lathe
Description:
TOS TRENS SN 710S 2m Gap Lathe
2m bed
4 jaw chuck
3 jaw chuck
850 mm 4 jaw chuck
Moving Steady
Fix steady
Selection of face plates
8 of tool post holders
Gap piece
ACU-RITE Digital Readout
Selection of carbide tooling
sn 7100 71 20 01 0032
|
SN 710 S is a universal centre lathe with main motor output of up to 11 kW and spindle bore up to 105 mm. Its unique design and high quality guarantee high stability at material machining. Major advantage of this model is an option of design with extended bore and higher power. |
||||||||||||||||||||||||||||
| Technical parametres Working range
Work piece weight
Spindle
* bore 105 mm ** bore 130 mm |
||||||||||||||||||||||||||||
Carriages
| Cross slide working travel | 400 mm |
| Tool slide working travel | 180 mm |
| Max. tool size | 40 x 25 mm |
| Traverse feed number | 38 |
| Working range of longitudinal feed | 0,039 - 4,8 mm.rev -1 |
| Working range of cross feed | 0,0195 - 2,4 mm.rev -1 |
| Longitudinal rapid traverse | 3000 mm.min -1 |
| Cross rapid traverse | 1500 mm.min -1 |
Tailstock
| Tailstock sleeve diameter | 100 mm |
| Tailstock sleeve travel | 240 mm |
| Tailstock sleeve internal taper | MORSE 6 |
| Cross resetting | ±10 mm |
Threads
| Metric threads | - number | 29 |
| - range | 0,5 - 40 mm | |
| Whitworth threads | - number | 38 |
| - range | 1 - 80 threads./1" | |
| Modular threads | - number | 26 |
| - range | 0,25 - 20 mm | |
| Thread Diametral Pitch | - number | 31 |
| - number of DP thread | 2 - 72 |
Power drives
| Total power input | 9,2 kVA |
| Supply voltage | 3 x 400 V ± 10% |
| Motor output: | |
| - main drive | 7,5 kW |
| - coolant pump | 0,09 kW |
| - rapid traverse | 0,94 kW |
Dimensions
| Width x Height | 1275x1635 mm |
| Length for DBC 2000 | 4015 mm |
Weight
| Length for DBC, 2000, | 3250 kg |
The Lead Screw, was removed from machine to be checked after been knocked, and will be refitted and fully working before the machine leaves site.
Location: Solihull
Export Information
Please note: If you are successful in purchasing an item and wish to export it from the UK, a charge of £75.00 will be automatically added to your invoice to cover preparation of the goods and completion of the required UK export customs declarations. This process has been a mandatory UK export requirement since 1 January 2021.
All invoices are issued on an Incoterms FCA basis.
Exports outside the EU may require an export licence. Where applicable, a further charge of £250.00 will be automatically added to your invoice. Please also note that, while an export licence is being processed, the purchaser is responsible for placing into storage until the licence is issued.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Bid information
Time remaining
01 Mar 2012 16:10:00 GMT